Internal Pipe Blasting Equipment
Air Transport
Sea Transport
Land Transport
- Shipyards, pipe factories, refineries, and water, gas, and chemical production facilities are a few examples of industrial applications.
- Adjust the Moving Ring so that the eight carriage wheels rest on the inner wall of the pipe to be cleaned, and then tighten the thumbscrew to secure it.
- Place the rotating nozzles into the pipe to be cleaned for the trial run and sand blasting, but do not begin with the nozzles outside the pipe to be cleaned.
- Adjust the regulating sleeve of the sand feed pipe so that it is as tight as possible (first, loosen the lock nut, then adjust with the provided wrench, then tighten the lock nut after adjustment), however, the speed must be controlled between 200 and 500 rpm.
- Before beginning to sandblast, insert the sandblaster into the pipe that needs to be cleaned and move it from one end to the other.
Leading Supplier & Exporter
Trustseal Verified
ISO Certified
Manufacturer
Internal Pipe Blasting Machine
Internal pipe blasting equipment is classified into air blasting equipment and wheel blasting equipment. the air blasting equipment is mainly for small pipes which a diameter under 500mm, and it can blasting processing up to 8 pieces at one time with automatic pipe handling systems. the wheel blasting equipment is mainly for big pipes which a diameter above 500mm, and it can only blast cleaning one piece at a time.
Internal Pipe Cleaning Equipment
Airo Shot Blast internal pipe cleaning tool quickly, effectively, and reliably removes corrosion, dust, and another residue from inaccessible areas inside the piping. The operation is simple: a blasting pipe is fitted with a pipe tool, and the tool is withdrawn from one end of the pipe to the other.
Internal Pipe Blasting
This kind of Internal pipe blasting Machine can not only clear the dirt, scale, welding slag, etc. from the internal pipes, but it also can reduce the internal surface stress. Thus, this kind of equipment can vastly increase the service life of the steel pipe and reduce the internal corrosion of the steel pipe, thereby improving the intrinsic and appearance quality of the steel pipe.
We offer special Internal pipe blasting machines that operate on the air blast principle. The lance Sand blasting nozzle is utilized for cleaning the interior surface of the pipe.
The machine can be provided with an inlet and outlet conveyor and handling system. The shot-blasted surface provides superior bonding for the final coating.
The machine is widely used for cleaning new or utilized seamless steel pipes.
Advantages of Internal Pipe Blasting Equipment:
- Improve the corrosion resisting ability.
- Improve the bonding strength of steel surfaces and coatings.
- Further, increase the anti-fatigue capability of the steel tube and extend its life.
- And optimize the craftwork state of the pipe internal surface.
- Most importantly, the whole blasting unit greatly enhances the efficiency of cleaning.
- Moreover, Reduce the labor intensity of cleaning works.
Internal Pipe Coating
The Airo Shot Blast orbiter applies a wide range of coating types clearly and evenly to the inner diameter of piping, following the blast process. Set at one end of the pipe and returned along its length, the Orbiter applies a consistent layer of paint thru a rotating atomizing nozzle, assuring even coating. The Orbiter is fit with any available airless pump and comes in the following two
Internal pipe blasting equipment Manufacturer
Airo Shot Blast is a Manufacturer of Internal pipe blasting equipment in India. We are also a Manufacturer, Supplier, and Exporter of Sand Blasting Machine, Portable Shot Blasting Machine, Grit Blasting Machine, pressure Sand blasting cabinet, shot blasting room, Sand Blasting Cabinet at a low price for sale.