Thermal Arc Sprayed Metallic Coating Equipment
Thermal arc sprayed metallic coatings equipment
Thermal arc sprayed metallic coatings equipment is widely used as a protective coating due to its capability to withstand high temperature and cost-effective process. It has been utilized by many industrialists in the oil and gas sector, where most of the applications are in atmospheric conditions. The organic coating could fail prematurely and result in corrosion progression from a coating failure. 99.5% was used as the coating material in the wire form of a 2.3 mm diameter using a wire arc spray gun method. Thus, from the overall results and analysis, it was found that the thermal arc sprayed metallic coatings equipment can perform coating duty effectively.
| Variable Parameters | Value |
| Compressed Air | 6 bar |
| Voltage | 40V |
| Ampere | 220A |
| Relative Humidity | <75% |
| Spray Angle | 90° |
| Spray Pattern | Spherical |
Thermal Spray Equipment Application
- The main objective of the application of thermal spray coating is to protect and reduce steel structure from corrosion apart from reducing wear and rate of material loss.
- Due to these characteristics, thermal spray coating is very useful to protect steel structures in any atmospheric condition, particularly in the marine environment.
- Generally, a metallic thermal spray coating is produced when deposited material either in metalizing wire or powder form is melted by a heat source.
- The melted material is then sprayed onto a substrate to form a coated material layer.
- In thermal wire arc spray coating, the wire is melted by an electrical source causing the formation of the arc which produces heat.
Thermal Spray Equipment Uses
- Copper Metallic coating components used in the automobile industry
- The aeronautical industry uses these types of thermal arc sprayed metallic coatings.
- Navy defense metallic coatings are used.
- The Gas Turbine industry uses thermal coatings.
Note: Thickness is measured & recorded for a coated component using a certified thickness gauge named PCE-CT 5000 Coating Thickness Gauge.
Thermal Spray Equipment Manufacturer
Airo shot Blast is the leading Thermal Arc Sprayed Metallic Coating equipment manufacturer in India. we are the best manufacturer, supplier & Exporter of thermal spray gun, arc spray gun, flame spray gun, sand blasting machine, shot blasting machine, grit blasting machine, sand blasting cabinet, shot blasting room, abrasive media in India at a low price for sale.
Airo Shot Blast is Best Thermal Arc Sprayed Metallic Coating used in a thermal spray gun process. We also provide better solutions for surface preparation.